There are faucet replace ways to combat this water damage disaster. Let's talk about the four steps you can take, to prevent this from happening to you and your family.
There are two, one on each side of the toilet, closet bolts which hold the toilet to the floor. If there are caps over the bolts, remove or pop them open. Using a small crescent wrench unscrew the nuts from the bolts. Alternate side to side when unscrewing this will be much more important when reinstalling the water line repair bolts but alternate anyhow.
Another obvious indicator is if the water you get is close to cold as ice, then your water heating device has already reached its maximum level of service. If it can talk, it might have been shouting at the top of its voice telling you it needs replacement.
Depending on your repair job you might need a bucket that will fit below the sink trap, as well as some rags and newspaper. Masking tape is useful for labeling and for wrapping around the heads of the wrench to protect your chrome tap handles. Rubber gloves are recommended, particularly when working with the toilet, but there are greases and glues that you may not want on your hands.
The water line repair most likely damaged your electrical outlets and lighting fixtures. Have a qualified electrician come in to evaluate and repair the electrical.
There are a lot of different shapes and styles of toilets but, with a few exceptions, they all work about the same. Water is released from the tank (many commercial toilets use a special valve instead of a tank) into the bowl to flush the waste into your drainage piping. Basically pretty simple, right?
The next huge thing is to prevent and kill mold that has already started growing. Mold is the most dangerous thing when an area floods. Mold can turn deadly within a extended period of time. Use mold killing agents like Killz and other products on the the market. Be extremely thorough with this process. If the water flooded above the dry wall line, you MUST remove the dry wall to make sure you can replace insulation and dry wall which mold naturally is attracted to. Painting a Killz primer on the concrete is a great idea before installing new carpet and drywall. This will ensure that you have prevented future mold growth and will also ensure the safety of your family.